Classification Society / Class:
American Bureau of Shipping
Class Notation:
Hull & Machinery for Class ABS Maltese Cross + A1 + AMS Circle E for unrestricted service
Condition:
Work-In-Progress (17 months to completion)
Port of Registry:
Malaysia
Location:
Malaysia
Length Over All:
75.00 m
Length Between Perpendiculars:
72.20 m
Molded Beam:
20.00 m
Molded Depth:
6.50 m
Designed Draft:
5.00 m
Designed Speed:
11 knots @ 100% MCR
Fuel Oil Tank Capacity:
Approx. 650 m3
Fresh Water Tank Capacity:
Approx. 1200 m3
Crew Accommodation:
196 Men
Main Deck Strength
10 tonnes/m2
Main Engines
Make/Model: (2 units)
Cummins / KTA50-M2
Power @ 1900 RPM
1800 BHP x 2
Gear Box
Make/Model: (2 units)
Reinjtes / WAF664
Ratio: 5.04:1
Generator Sets
Make/Model: (3 units)
Cummins / KTA19-D(M)1
Power Rating:
360 kW
Emergency Generator Set
Make/Model: (1 unit)
Cummins / 6CTA8.3-D(M)
Power Rating:
150 kW
Bow Thruster
One (1) 8t transverse FPP thruster. The unit shall be driven by a diesel engine mounted in the fore part of the bow thruster compartment. One (1) remote stations c/w instrument panel and the rpm of the engine will be controlled from both the forward and aft controls in the wheelhouse.
Anchor Windlass/Ramp Door Winches
One (1) unit electro hydraulic anchor windlass suitable for 46mm dia. Stud link Grade 2 chain c/w two warping drums is to be provided. The cable lifters and warping drums are to be independently clutched and variable speed local hydraulic control on forward of forecastle deck, chain pipes, cable stoppers and hawse pipes are to be arranged at site. Windlass is to be provided with manual brake and clutch with local control.
Anchors, Chain Cables & Mooring Lines
Anchors : Four (4) Delta flipper anchors, each 5000 kg for mooring &
one (1) spare anchor
Anchor wire : Each anchor to be fitted with 3m pig tail chain. Anchor wires of
1500 m length and 38 mm diameter shall be supplied five (5) in
total, one being spare. Construction to be 6 x 19 RHRL,EIPS,
IWRC GALV
Mooring Lines : 1 x 96 m dia. X 200 m polypropene rope
Single Drum Mooring Winch
Maker (4 units) : Plimsoll
Type : Single drum c/w auto-spooling
Drum Pull (1st Layer) : 40T x 0-10m/min (low speed)
10T x 0-30m/min (high speed)
Drum Capacity : 1500m x 38mm dia. wire rope
Hydraulic Vertical Capstan
Quantity : 2 units
Type : Vertically Mounted
Rated Pull : 5T x 0-15 m/min
Horsepower Required : 22 kw (approx.)
Control : Local Control
Lattice Boom Type Offshore Pedestal Crane
Make/Model : Favelle Favco / 6/10K (Full compliance with API
Specification 2C & ABS classification)
Rotating System : “King Post†type (consists of a vertical tubular
member, mounting platform & tubular thrust
type gantry)
Boom Length : Approx. 135 ft
External Fire Fighting System
a) Fire Fighting Pumps
One (1) unit seawater pump of capacity 300 m3/hr at 120 m head.
The Ni-A1-Bronze casing and impeller pump is to be direct-coupled to the diesel
engines and remote control c/w engine indicator panel in wheelhouse.
b) Fire Monitors
Two (2) units Water Monitors – stainless/bronze housing Jet/Fog type.
Monitor Water
Capacity 150 m3/hr
Inlet pressure 12 bars
The water monitors to be manually controlled and capable to turn
through 360 degrees positioned towards the stern of the vessel.
Make: Hamworthy
Steering Gear
Electro-hydraulic steering gear of about 10 t-m. 2 x 35 degree rudder angle c/w emergency hand hydraulic steering.
Wheelhouse : Steering lever joystick type electric-hydraulic
Steering gear room : Hand hydraulic for emergency
Make : Wagner
Bilge/Ballast Pump & GS/Fire Pump
Make/Model: (2 units)
Hamworthy / C2G-100HR-AAN-B06A4-CNB
Vertical self‑priming centrifugal SW pump
Capacity:
75 m3/ hr at 45.0 m total head
General Service/Fire Pump & Fire Service Pump
Make/Model: (2 units)
Hamworthy / C2G-125HR-AAN-B14G3-CNB
Vertical self‑priming centrifugal SW pump
Capacity:
170 m3/ hr at 105 m total head
Fuel Transfer Pump
Make/Model: (1 unit)
ITUR Model RC-2RD
Horizontal gear pump
Capacity:
15 m3/ hr at 18.0 m total head
Make/Model: (1 unit)
ITUR Model RC-3R
Horizontal gear pump
Capacity:
30 m3/ hr at 57.0 m total head
Oily/Bilge Water Separator
One (1) unit oily bilge water separator, capacity 1.0 m3/hr @ 2 kg/cm2 and single 15 ppm c/w bilge pump as per IMO-Resolution MEPC 107 (49) requirement
Maker/Model : Taiko Kikai / USC-10XLD-1NSA
Navigation Equipment
Primary X-Band Radar:
GEM LD-1810/6/AC
Secondary Radar:
GEM LD-1810/6/AC
Speed Log:
LILLEY & GILLIE
GPS:
FURUNO GP-150
Echo Sounder:
SKIPPER ED-165
Autopilot System
ANSCHUTZ PILOTSTAR D
Magnetic Reflector Compass:
LILLEY & GILLIE
Gyro-compass (GMDSS):
ANSCHUTZ STD 22 G/GM
AIS
MCMURDO M-2
Anemometer & Anemoscope
Walker